Toning the resin varnish. Then, if it is a rough glass-fiber product without the gel coat layer, it can be easily treated with putty, it is recommended to apply resin paint. Although the varnish is slightly thin, if it is serious, it can be applied twice or with slightly thicker floor paint. One is that the gel coat is not easy to purchase, and the other is that the gel coat is not sticky on the surface and sticks to the hand. The premise is that the surface must be roughened, and the exterior latex paint applied in front should be completely removed. This latex paint and Fiberglass must not be bonded.
The coloration of the Fiberglass statue is completely dependent on the colorant added to the surface gel coat.
In the molding of Fiberglass, in the surface resin (gel coat), it is necessary to determine the amount and color of the added color paste according to the requirements, and there is no way to change after curing.