Fiberglass sculpture color breakdown:

Acrylic pigment coloring method: Acrylic pigment is one of the more commonly used paints in pigments, but the quality varies greatly, so it is necessary to use a better quality acrylic pigment, and it must be new, if there are impurities such as dry blocks in the pigment Affect the overall effect, the coloring pen must also choose a better quality, otherwise it is easy to shed, sticking in the pigment will affect the overall coloring effect of the glass fiber reinforced plastic sculpture, Bo Yi sculpture factory will choose advanced makeup pens instead.

When acrylic is colored, the first pass should be thin, very thin, and it doesn’t matter if the background color of Fiberglass is exposed. If the first pass is thick, although the initial effect looks good, but the color is getting thicker as you continue to adjust, plus the glass fiber reinforced plastic surface has been polished very smooth before, the pigment is not easy to adhere, thick acrylic color Extremely easy to peel off.

The technique of imitation copper fiberglass coloring

The technique of imitation copper fiberglass coloring

It’s too difficult to add color to the peeled area, and it’s easy to lose your mind to re-paint all the colors. Therefore, the color should be thin, especially the first pass. The acrylic paint has strong hiding power, and the thinner color will be full.

If it is required to avoid the effect of brush strokes, use a very flexible nylon pen to quickly sweep back and forth on the glass fiber reinforced plastic surface, and the collected pigments must be swept away. And pay attention to wet and dry, too dry and white, too wet paint is flung everywhere, and there will be obvious brush strokes.

A uniform color area must be completed at one time. After the paint is dry, it is difficult to connect. Even if the difference between the two colors is small, it is very difficult to connect.

Using acrylic to color Fiberglass sculpture is a cheaper method. Acrylic coloring is relatively used in some Fiberglass sculpture forms that put metal or stone imitation. For example, the effect of Fiberglass copper imitation and Fiberglass stone imitation need to be painted by hand. .