From the 3D modeling to clay sculpture, the FRP character statues on display are 100% hand-made by international professional sculpture technicians with the extreme perfectionism and artisan spirit of Virgo.
In order to keep improving and present the sincere masterpiece of the two-dimensional image that is most true to the audience who loves my emperor, after the first version of the “My Emperor” colossus was formed, the expression of My Emperor’s proud and “domineering” was not well explained by the expression. We do not hesitate to “smash” steel at the FRP site, which will take huge financial resources and energy.
The sculptural picture of the cat driven by my emperor also shows us a stark contrast of many inferior garbage glass fiber reinforced plastic sculptures, which can make the glass fiber reinforced plastic cartoon sculptures to a higher and better level. As a professional Beijing sculpture company, Bo Yi has professional The 3D modeling team, advanced 3D printing equipment and post-finishing technicians can undertake any large and small FRP sculptures and artworks.
First of all, there are no clear standards for FRP sculptures in China. First, choosing the most cost-effective FRP sculpture from the price range you can afford is your FRP sculpture acceptance standard, but how to understand each link requires you to understand a lot of details. Next, we will answer your questions in detail:
FRP sculpture acceptance standards are usually visually inspected using normal or corrected vision. Under indoor 40W fluorescent lamps, the distance between the eyes and the test panel is about 30cm and 120 ~ 140o.
Color: The color should be basically consistent with the selected template or swatch, the surface color of the product is uniform, and there is no obvious color difference by visual inspection.
Cleaning: Visible surface parts inside and outside of glass fiber reinforced plastic products should be clean, without stains, oil stains and other stains that affect the appearance.
Damage and deformation: The surface of the glass fiber reinforced plastic products must not be bumped or deformed, and the surface should be flat without corner warping and bending.
Abrasions: Pieces of abrasion caused by friction are not allowed. Granules and impurities: There should be no small particles, impurities, bumps, protruding marks or flow molding marks on the surface of the product. Dispersion and a small amount of particles are allowed.
Dimples and bubbles: There should be no pits, bubbles, or pores on the surface of the product. Dispersions and small amounts are allowed. Scratches: The surface of the product must not have scratches exceeding 0.2 × 10mm, and the scratches must not be too deep; the surface of the product must not have scratches in pieces, which are allowed to disperse and exist in small amounts.