Compared with other surface effects of Fiberglass, the process of paint glass fiber reinforced plastic sculpture is more vivid and the effect is better and realistic. However, the level of the process also directly affects the effect of the paint glass fiber reinforced plastic sculpture and maintenance.

Painted Fiberglass Statue sculpture is a process for coating the surface of Fiberglass. Normal paint can be dried at room temperature.
The lacquered glass-reinforced plastic sculpture is a process in which the paint or powder is not sprayed onto the surface of the Fiberglass sculpture and heated to a certain temperature (generally about 180-200 degrees) to dry and solidify the paint. The paint of this process is much stronger than that of drying at room temperature.
In addition to high temperature baking varnish, there are also UV light solids.

Painted glass steel sculpture
The keywords to be noted in the paint glass sculpture are as follows:

Degreasing, phosphating, electrophoretic primer, intermediate coating, topcoat, (color paint,) varnish
epoxy primer
polyurethane topcoat
acrylic polyurethane topcoat, etc.
Tools: spray gun is a must

Painted glass and steel sculpture contrast

First, the paint glass fiber reinforced plastic sculpture process: A, baking varnish: three times the primer on the substrate, four times the topcoat, each time the paint, are sent to the dust-free temperature room baking room, baking. B. Painting: Grind the woolen cloth on the substrate, spray it on the top, and dry it naturally.

Paint fiberglass reinforced plastic sculpture process

Paint fiberglass reinforced plastic sculpture process

Second, painted glass fiber reinforced plastic sculpture film. Practice: Touch the four corners of the paint glass fiber reinforced plastic by hand, whether it is smooth and vouchers; observe whether the color of the corners is the same as the overall color of the painted glass-reinforced plastic sculpture.

Compared:

A. Baking paint: smooth edges and the same color. Prove that the paint film is even and full of color.

B. Painting: The edges and corners are rough and the color is lighter than the overall color of the painted glass fiber reinforced plastic sculpture. Prove that the paint film is uneven and the color is not full:

Third, the grain. Practice: Look at the light, look at the surface of the painted glass fiber reinforced plastic sculpture, whether there is an orange peel phenomenon.

Contrast: A, baking varnish: paint glass fiber reinforced plastic sculpture surface is smooth, no grain, orange peel phenomenon.

B. Painting: The surface of the painted glass-steel sculpture has a grainy surface, which is not smooth and has an orange peel phenomenon.

Fourth, the surface. Practice: Touch the surface of the painted glass fiber reinforced plastic by hand to see if there are dust particles or bubbles.

Compared:

A. Baking paint: The surface of the painted glass fiber reinforced plastic sculpture is smooth and smooth.

B. Painting: The surface of the painted glass-steel sculpture has particles, which are not smooth and have a different touch.

Paint glass fiber reinforced plastic sculpture data expansion:

(1) Painted glass fiber reinforced plastic sculptures are divided into two categories. One type of low-temperature baking varnish has a curing temperature of 140 ° C – 180 ° C and the other type is called high-temperature baking varnish. The curing temperature is 280 ° C – 400 ° C. High-temperature baking varnish, the English full name is Polytetrafluoroethylene, referred to as Teflon, PTFE, F4 and so on. Teflon high-performance special coating is a fluorine coating based on polytetrafluoroethylene as the matrix resin. The English name is Teflon. Because of the pronunciation, it is often called Teflon, Teflon, Teflon, and Teflon. Long and so on (all are the transliteration of Teflon).

(2) Baking varnish, a new method of making paints (process) in the manufacture of furniture. The method is to spray several layers of paint on a substrate that is ground to a certain degree of roughness (usually a high-density sheet). And baked at high temperatures. The process currently requires high paint and good color rendering.

Baking paint can be said to be a kind of paint. Generally speaking, the paint is applied to the surface of the object and then baked in the oven. The advantage of the paint is a bright color, strong visual impact, good surface finish, and easy Scrubbing, moisture and fire resistance.

First of all, the paint needs to be put on the Fiberglass sculpture, as the bottom layer of the paint, three times of primer on the substrate, four coats of paint, each time the paint is sent to the dust-free room, baking

After the putty is leveled, the putty is dried and the surface of the painted glass fiber reinforced plastic sculpture is polished and smoothed. Look at the light, look at the surface of the painted glass fiber reinforced plastic sculpture, whether there is an orange peel phenomenon. The surface of the Fiberglass sculpture should be free of grain and orange peel. Touch the four corners of the painted Fiberglass sculpture by hand, whether it is smooth and flat; observe whether the color of the corner is the same as the color of the Fiberglass sculpture.

Then spray the primer 3-5 times repeatedly. After each spray, polish the paint with water sandpaper and cloth. After the end, touch the surface of the painted glass fiber reinforced plastic by hand to see if there are dust particles or bubbles. The surface of the paint door should be smooth, smooth, free of particles, and no touch.

Finally, spray 1-3 times of the topcoat, then use high temperature baking to cure the paint. After the end, use a hard object to gently hit. There should be no cracks on the painted surface, no serious paint film peeling off, no abnormality such as white skin, and the paint film is not obviously damaged.