Add the appropriate amount of auxiliary materials to the epoxy resin in a certain order (If the operating temperature is low, you can first heat the epoxy resin to an appropriate viscosity range for easy operation.), Stir well and let stand for 5 minutes to stir After the bubbles generated in the disappeared, stand by.
Prepare the modified amine curing agent for use (note that it should be kept in a sealed place when not in use, and avoid contact with air to prevent the surface of the cured product from whitening due to moisture.)
Handle the molds and install the required accessories (this operation can be performed at the same time as steps 1 and 2).
Mix the two materials prepared in advance according to the ratio provided by the manufacturer (the auxiliary materials added in the epoxy resin are negligible-refers to the epoxy value). The amount.
Keep it level and place it in an oven at a certain temperature or in an environment suitable for curing. After curing is complete, the product is safely removed from the mold.