Natural Fiberglass is actually alive, so how to maintain Fiberglass sculpture is especially important:

Whether it is hard granite (hardness HRs88-111±4-7) or softer marble (hardness HRs46-77±3-5), it is not resistant to wind and sand and long-term enthalpy of soil particles. Because of the need to use dust collectors and electrostatic mops from time to time to do a good job of dust removal and cleaning.

Maintenance of Fiberglass statues

Maintenance of Fiberglass statues

It is best to place a dividing mat at the entrance to the commercial space to filter the sand from the shoes.

It is best to change the shoes after entering the house to reduce the chance of sand dust wearing the stone surface.

Regular maintenance, maintenance of gloss, dust removal, and cleaning are not allowed to keep the bright stone luster to be continued.

Therefore, we must regularly ask professional companies to send people to maintain maintenance and gloss regeneration.

1. Immediately remove all pollution. All stone materials have natural capillary pores. The pollution sources (oil, tea, coffee, cola, soy sauce, ink, etc.) can easily penetrate into the interior of the stone through the capillary pores, forming annoying stains. Therefore, we must choose a good quality stone special protective agent applied to the stone to prevent pollution sources from polluting the stone. It is necessary to know that all protective agents are not likely to block pollution for a long time. Therefore, once a source of pollution falls on the stone, it must be removed immediately to prevent penetration into the pores of the material.

2, always keep the ventilation and dry stone is afraid of too much environmental humidity. Water vapor will produce hydration, hydrolysis, and carbonation of stone sculptures, producing water spots, whitening, weathering, denudation, rust yellow, and other diseases, destroying the stone. Therefore, the stone installation and exit should always be kept ventilated and dry.

3, to be regularly applied as a protective treatment to maintain the life of the stone, to prevent the penetration of water and pollution sources, must be regular (depending on the type of stone and the quality of the protective agent is best 1-3 years to do 1-2 treatments) for protective treatment. The quality of the protective agent must be paid special attention. After the application, it must be able to maintain the permeability, water-resistance and antifouling properties of the stone. Never use an unidentified protective agent, so as not to fail to achieve the protective effect, but increase the trouble of stone maintenance.