Mold making method: adopt hand lay-up molding method, design ideas before making. Start with one part of the pasted product. After a part is cured, the combined mold is continued to paste. Combine as many unit blocks as possible at one time. Finally, a unit block is left. The unit block is pre-formed and glued to the overall sculpture. The difficult-to-manufacture parts of the sculpture, such as the animal’s corner legs and tails, can be roughly shaped with corresponding metal materials, and then glass fiber reinforced plastic is formed on the materials, which are polished and trimmed. The shape of the sculpture is relatively complicated and should be treated specially. The place where glass is difficult to lay should be filled with resin first, and then glass fiber and gingham cloth should be laid. The length of the resin putty for the surface layer is preferably 10 millimeters. When molding, the metal skeleton is buried in the sculpture. Increase the stiffness and strength of the sculpture, increase its service life, and finally install it with a metal skeleton.
Post-processing method: On the one hand, post-processing is to repair local defects of the product, and it is important to produce surface effects. Common surfaces are imitation copper and imitation bronze.
The sculptures made of Fiberglass have bright colors, beautiful lines and beautiful shapes. Can be made into a variety of effects imitating gold, copper, stone, showing a clear sense of the times. Good Fiberglass sculptures must be designed, modeled, shaped, and treated to ensure the quality of each link.