Ordinary Fiberglass baking paint sculpture is used for furniture baking paint process, a spray painting production method (craft) emerging in furniture manufacturing. The method is to spray several layers of paint on a roughened substrate (usually a high-density board). And shaped by high-temperature baking. This process currently requires higher paint and good color rendering.

Ordinary glass steel paint sculptures are divided into two categories. One type of low-temperature baking paint has a curing temperature of 140 ° C-180 ° C, and the other type is called high-temperature baking paint. Its curing temperature is 280 ° C-400 ° C.

Fiberglass baking paint sculpture process introduction

Fiberglass baking paint sculpture process introduction

High-temperature baking paint, English is called Polytetrafluoroethylene, Teflon, PTFE, F4, etc. for short. Teflon high-performance special coating is a PTFE coating based on polytetrafluoroethylene. The English name is Teflon. Because of its pronunciation, it is often called Teflon, Teflon, Teflon, Teflon. Long and so on (both are transliterated by Teflon).

The ordinary glass steel paint sculpture is not as good as the high-grade glass steel paint sculpture in terms of color purity and weather resistance.

The advanced glass fiber reinforced plastic paint sculptures commonly used in Fiberglass sculpture factories are actually similar to the car paint process.

Car paints are generally baking paints. In the depot, after the welding of the frame and the shell (and sometimes manual repair), the next step is painting. Generally, the primer is the first. The light car shell is dipped into a syrup-like paint tank, and the drying primer is taken out; then it is sent to a dust-free workshop, and the topcoat is sprayed with an electrostatic spraying process. Then dry it at about 200 degrees. For a more elegant point, there will be another layer of varnish. In this way, the painting process is complete.